How to Connect Bose Headphones to iPhone

How to Connect Bose Headphones to an iPhone With a Cable

Some Bose headphones support wired audio through a 3.5 mm audio cable.

The connection method depends on your iPhone model and the ports available on the device.

For an iPhone with a 3.5 mm headphone jack

If your iPhone has a headphone jack:

1. Plug the audio cable into the Bose headphones.
2. Plug the other end into the iPhone’s headphone jack.
3. Start playing audio.

For an iPhone without a 3.5 mm headphone jack

You may need a compatible Apple or third-party adapter between the iPhone’s port and the Bose audio cable.

The required adapter depends on the port on your iPhone. Newer iPhones use USB-C, while some older models use Lightning.

Once connected, select the appropriate audio output if your iPhone does not automatically route sound through the headphones.

Bose Headphones Not Connecting to iPhone? Try These Fixes

If your Bose headphones do not connect, work through these steps in order.

1. Make sure the headphones are in pairing mode

Simply turning on the headphones does not always mean they are available for a new Bluetooth connection.

Put the headphones into Bluetooth pairing mode and check for the voice prompt or flashing Bluetooth indicator.

2. Check whether they are connected to another device

Your Bose headphones may automatically reconnect to a previously paired phone, computer, or tablet.

Turn Bluetooth off on nearby devices or disconnect the headphones from them, then try pairing with your iPhone again.

3. Turn Bluetooth off and on

On your iPhone:

Settings > Bluetooth > Off

Wait a few seconds, then turn Bluetooth back on and try connecting again.

4. Forget the Bose headphones and pair again

If your headphones are listed under My Devices but will not connect:

1. Open Settings > Bluetooth.
2. Tap the ⓘ next to your Bose headphones.
3. Select Forget This Device.
4. Put the headphones back into pairing mode.
5. Select them under Other Devices.

This creates a new Bluetooth pairing between the iPhone and headphones.

5. Restart both devices

Turn your Bose headphones off and back on.

You can also restart your iPhone and then try the Bluetooth connection again.

6. Check the battery

Low battery power can prevent some Bluetooth headphones from connecting reliably.

Charge your Bose headphones and try pairing them again.

Why Are My Bose Headphones Connected but There Is No Sound?

If your iPhone says the Bose headphones are connected but audio is coming from the phone speaker, check the audio output.

Start playing audio and open the iPhone’s Control Center. Select the audio output/AirPlay control and choose your Bose headphones.

Also check the volume level on both the iPhone and headphones.

Can I Connect Bose Headphones to an iPhone Without the Bose App?

Yes. Most compatible Bose Bluetooth headphones can be paired directly with an iPhone through Settings > Bluetooth.

The Bose app can provide additional setup and management features, but it is not necessarily required for basic Bluetooth audio.

Can I Connect Bose Headphones to More Than One Device?

Some Bose headphones support features such as multipoint connections, allowing compatible models to maintain connections with more than one device.

The exact behaviour depends on the Bose model and its software.

If your headphones keep switching between devices, disconnect them from devices you are not currently using or check the connection settings available for your model.

Are Bose Headphones Compatible With iPhone?

Yes. Bose Bluetooth headphones are generally compatible with Bluetooth-enabled iPhones.

Compatibility with specific features can vary by Bose model, iPhone model, iOS version, and the Bose app or headphone firmware.

For wired connections, compatibility depends on the connector and adapter required by your particular iPhone.

How do I put Bose headphones in pairing mode?

Turn on the headphones and press and hold the Bluetooth or Power/Bluetooth control until the headphones indicate that they are ready to connect. The exact control and voice prompt can vary by Bose model.

Why won’t my Bose headphones show up on my iPhone?

Make sure Bluetooth is enabled on the iPhone and that the Bose headphones are in pairing mode. If they are connected to another device, disconnect them first and then search again under Other Devices.

How do I reconnect Bose headphones to my iPhone?

Open Settings > Bluetooth, make sure Bluetooth is enabled, and select your Bose headphones under My Devices. If they were removed or forgotten, put the headphones into pairing mode and select them under Other Devices.

Do Bose headphones work with iPhones?

Yes. Bose Bluetooth headphones can be used with compatible iPhones for music, calls, and other audio. Specific features depend on the Bose model and iPhone.

Can I use Bose headphones with an iPhone without Bluetooth?

Yes, if your Bose model supports wired audio and you have the appropriate cable and adapter for your iPhone.

Connect Your Bose Headphones to Your iPhone

Connecting Bose headphones to an iPhone is usually a simple Bluetooth pairing process: turn on the headphones, enter pairing mode, open Settings > Bluetooth on your iPhone, and select the Bose headphones.

If the headphones do not connect, check whether they are already connected to another device, restart Bluetooth, forget the existing pairing, and pair them again.